M44-7  Cartridge & Record Needles
Skip Resistance: ultra high
Output: ultra high
Record Wear: ultra low
Sound Emphasis: big bass

 M44-7

Revived exactly the same as the original, this legendary battle needle offers ultra-high skip resistance and ultra-high output. The needle of choice for many champion DJ's worldwide, including The former Invisibl Skratch Piklz, X-ecutioners, and The World Famous Beat Junkies.

 Engineered for scratch DJ's and turntablists, the M44-7 is designed not to skip under even the most demanding circumstances.

M44-7 DJ Record Needle, Turntablist, Scratch
M44-7-H M44-7 Pre-Mounted on a Technics Headshell
N44-7 Replacement Needle, Single, with Box and User Guide
N44-7Q Replacement Needle, 4 Pack, Mounted on a card
N44-7Z Replacement Needle, 12 Pack, Mounted on a card
Engineered for scratch DJ's and turntablists, the M44-7 is designed not to skip under even the most demanding circumstances.
Specifications
 
Tone Arm Mount
Standard 1/2 inch
Cartridge Type
Moving Magnet
Output Voltage
Typical at 1 kHz
9.5 mV RMS at 5 cm/sec peak velocity
Recommended Load
47 kilohms in parallel with 450pf
Tracking Force
Effective at stylus tip
Range: 1.5 to 3 grams
Stylus Cantilever
Shure Type S
Heat-treated aluminum alloy / tubular
1.6 mil wall thickness / 34.5 mil diameter
Diamond Stylus Tip
Polished natural gemstone: Spherical
Radius: 0.7 mil
Frequency Response
Essentially flat from 20 to 17,000 Hz
Stereo Channel Balance
Within 2 dB
Channel Separation
Typical at 1 kHz: 20 dB
Net Weight
6.7 grams
Height
15.9 mm
Accessories Included
Attached flip-down Stylus Guard
Headshell Screwdriver (Phillips)
Extra Set of 4 Headshell Wires (4-99)
Stylus Cleaning Brush
Headshell Weight (3 grams)
User Guide
Mounting hardware
Stylus guard
Replacement Needles
Single with box & User Guide N44-7
4 Pack mounted on a card N44-7Q
12 Pack mounted on a card N44-7Z

Links

Copyright © 1996-2008 -- Mike Dunton -- All rights reserved